‘Seascape' Chalk Paint, Made By Paint (Blue Green)

In short, no! That is the main benefit of using our dedicated furniture paints. 

For most pieces, a good clean is sufficient - the paint is formulated to bond to surfaces. The only times I would recommend you use a primer is over metal, glass, ceramic, bleeding timbers such as Indonesian or mahogany species, which tend to bleed through any paint finish.

In those cases I would recommend using an appropriate base coat or with the bleeding timbers apply one or two coats of Polyseal which incredibly acts as both a blocker/primer and sealant. Who doesn't love a three in one?!

Chalk and Clay Paint is a great paint for those of you who love a rustic, velvety, chalky, matte finish and want the flexbility to spray or distress a piece (chippy, worn look). It's porous by nature so requires additional sealing with Polyseal, Finishing Wax, or a Finishing Oil for durability. It's a great paint for those of you want complete control over your finish.

It's more economical to use if you're painting large or several pieces given it's availability in a 1L size. 

The Mineral Paint has a built-in satin sealant so it's perfect for those of you who want to flip your pieces quickly and want an 'all-in-one' type paint.

The Mineral Paint line comes in different shades to the Chalk and Clay Paint line and is available in the 500ml size only. 

Yes. Chalk paint is porous, you'll need to seal with a non-toxic topcoat from our finishes collection which includes wax, Polysealor oil.

To give you a rough estimate, this is what I've used for typically sized projects.

Dining room table & 6 chairs - 2 x 1L of Chalk & Clay Paint& 1L of Polyseal

Buffet/sideboard - 1 x 1L of Chalk & Clay Paint& 1L of Polyseal, Finishing Waxor Finishing Oil

Large hutch or wall unit - 2 x 1L Chalk & Clay Paint& 1L of Polyseal, Finishing Waxor Finishing Oil

Coffee table -1L of Chalk & Clay Paint& 500ml of Polyseal, Finishing Waxor Finishing Oil

If you're applying Chalk and Clay Paint I recommend using our natural bristle brushes, it holds the paints well.

You can also use a quality mohair or foam roller if you're more of a roller fan.

Yep you sure can! It takes a while to get the hang of the technique but it will significantly reduce your labour time.

The most economical way to do this is with our 1L tins of Chalk and Clay Paint - you can use either an electric powered or air compressor powered spray gun.

I personally recommend using an air compressor powered Low Volume Low Pressure (LVLP) gravity fed gun with a 1.0mm - 2.0mm tip.

But why? The reason I prefer it over an electric powered spray gun is the level of control you have over the finish and the paint output. It's also easier and lighter to use than most electric powered guns which tend to be quite bulky. Also, the gravity helps guide the paint down into the tip where electric units need to suck the paint up and it often leads to paint wastage.

Keen to know more or want to buy the gear I have? Check out this step-by-step tutorial to spraying here. I've even got a video tutorial for you.

Yes, our paints and finishes are non-toxic and VOC free.

For further information, click here to read the Safety Data Sheet on Chalk and Clay Paint.

Yes you can! If using Chalk and Clay PaintI recommend sealing with a Finishing Wax.

Be sure to add only small amounts of water to the paint as needed when applying coats, do not dilute the paint too much for an optimal outcome. 

Yes, if the furniture is sheltered and not in direct sunlight. If exposed to full sun then our paint can still be used but we recommend a UV protective topcoat sealant.