The perfect off-white with just enough warmth but still remaining crisp, fresh and bright.
When you want to feel confident in recreating Hamptons interiors and don’t want to waste time questioning your colour choice this mineral paint is the answer to transforming your furniture in a weekend!
Imagine moving your dated furniture outside or into a garage, brushing on your mineral paint and watching the transformation happen – while never having to think to yourself ‘I don’t know how to get that classic Hamptons look’ again.
Proudly Australian made.
Shake the tin well and stir with a broad flat stirrer. Apply the paint with a synthetic brush, foam roller or spray gun. Occasionally, tannin rich timber may leach and require a sealant to be applied prior to painting. Test your piece first, and if so use a stain blocker, primer or undercoat.
Ensure surfaces to be painted are clean and free from peeling paint, mould, dirt, dust and grease. Sanding or priming is generally unnecessary, as the paint will stick to most surfaces. Painting on plastic, glass and metal may require use of an appropriate base coat.
Number of coats
In optimum conditions, the paint is touch dry in 30 minutes and can be recoated after 2 hours. Two coats are generally sufficient to achieve excellent coverage and opacity.
This tin will cover about 7 to 8 square metres depending on the surface.
Allow 7 days to fully cure before use (in optimum conditions).
We offer FREE shipping on all orders over $150.
Flat Rate Domestic Shipping - $15.00
We use Australia Post as this is the most reliable option for the majority of our customers.
On average delivery times:
Queensland - 1 - 2 days
Major cities - 2 - 3 days
Rural/regional areas - 3 - 5 days
Western Australia up to 7 business days.
Express Shipping - $20.00
We use Australia Post.
On average delivery times:
Queensland - 1 - 2 days
Other States - 2 - 3 days.
In short, no! That is the main benefit of using our dedicated furniture paints.
For most pieces, a good clean is sufficient - the paint is formulated to bond to surfaces. The only times I would recommend you use a primer is over metal, glass, ceramic, bleeding timbers such as Indonesian or mahogany species, which tend to bleed through any paint finish.
In those cases I would recommend using an appropriate base coat or with the bleeding timbers apply one or two coats of Polyseal which incredibly acts as both a blocker/primer and sealant. Who doesn't love a three in one?!
The Mineral Paint has a built-in satin sealant so it's perfect for those of you who want to flip your pieces quickly and want an 'all-in-one' type paint.
The Mineral Paint line comes in different shades to the Chalk and Clay Paint line and is available in the 500ml size only.
Chalk and Clay Paint is a great paint for those of you who love a rustic, velvety, chalky, matte finish.
Yes. Chalk paint is porous, you'll need to seal with a non-toxic topcoat from our finishes collection which includes wax, Polyseal or oil.
This is diffiicult to answer, but to give you a rough estimate this is what I've used for typically sized projects.
Dining room table & 6 chairs - 4 x tins
Bedside tables - 1 x tin
Side table - 1 x tin
Buffet/sideboard - 1 - 2 tins
Large wall unit/hutch - 3 - 4 tins
Coffee table - 1 x tin
If you're applying Mineral Paints, use the synthetic brushes.
You can also use a quality mohair or foam roller if you're more of a roller fan.
Yep you sure can! It takes a while to get the hang of the technique but it will significantly reduce your labour time.
I personally recommend using an air compressor powered Low Volume Low Pressure (LVLP) gravity fed gun with a 1.0mm - 2.0mm tip.
But why? The reason I prefer it over an electric powered spray gun is the level of control you have over the finish and the paint output. It's also easier and lighter to use than most electric powered guns which tend to be quite bulky. Also, the gravity helps guide the paint down into the tip where electric units need to suck the paint up and it often leads to paint wastage.
Keen to know more or want to buy the gear I have? Check out this step-by-step tutorial to spraying here. I've even got a video tutorial for you.
Yes, our paints and finishes are non-toxic and VOC free.
For further information, click here to read the Safety Data Sheet Mineral Paint.
Yes you can! If using Mineral Paint, it should be fine as it is. Be sure to add only small amounts of water to the paint as needed when applying coats, do not dilute the paint too much for an optimal outcome.
Yes, if the furniture is sheltered and not in direct sunlight. If exposed to full sun then our paint can still be used but we recommend a UV protective topcoat sealant.
Magical results at a great price. Turn your old, has been furniture into something special at a fraction of the cost. If you want to do a perfect refurbishment job on some old but good quality furniture with a minimum of fuss then this is the paint you need. Couldn’t be happier.
A Wonderful stylish and authentic Hampton style finish was achieved using Rustic White Mineral Paint. Very pleasantly surprised by the economical application of the paint to achieve full coverage.
First time using Made by Paint, purchased just the small can of Rustic White Mineral Paint and used less than half of the can to paint 3 coats on large coffee table. Smooth finish, white nice - my table was quite a dark wood so applied primer first to make sure coverage was great.