The calming colour of warm sand.
The Mineral Paint is so easy to use and will deliver a beautiful, smooth, satin sheen finish to your furniture and home decor pieces. With amazing adhesion, coverage and durability the paint does not require a primer or finishing topcoat sealant. Developed to withstand the harsh Australian climate it is suitable for both interior and exterior use, is UV resistant, washable and waterproof when fully cured after 7 days.
Mineral Paint is formulated with a built-in topcoat and does not need sealing. To remove unwanted drips or brush strokes between coats, sand when the paint is touch dry. Avoid sanding the final coat of paint where possible, as this will disturb the built-in topcoat and will need resealing. For added durability and protection in high traffic areas, applying a sealant is recommended. Use any of our Waxes, Polyseal or Finishing Oils to both protect and achieve the desired decorative look for your piece.
Shake the tin well and stir with a broad flat stirrer. Pour out the required amount of paint into a separate container and reseal the tin airtight for longevity. Apply the paint with a good brush, foam roller or spray gun. In optimum conditions, the paint is touch dry in 30 minutes and can be recoated after 2 hours. Two coats are generally sufficient to achieve excellent coverage and opacity. This tin will cover about 7 to 8 square metres depending on the substrate.